Maintenance Lubricants and Penetrating Fluids
THORLABS INC PTA1006 - 500 mL Bottle of Compressor Oil
For use in the PTA512, PTA513, and PTA514 are high-performance air compressors
MILLER STEPHENSON CHEMICAL COMPANY INC MS-252 PFPE RE-MOVE QUART
NC3733628 MS-252 PFPE RE-MOVE QUART
Essendant WD-40 Smart Straw Spray Lubricant 11 oz Aerosol Can
WD-40 Smart Straw Spray Lubricant 11 oz Aerosol Can
Electron Microscopy Sciences Fluoromount-G™ Slide Mounting Medium 25 ML
A special mounting media for immunofluorescent staining procedures. It is a water soluble, non-fluorescing medium which is well suited for use when the staining procedure has an aqueous final step. It contains 10% polyvinyl alcohol in phosphate buffered glycerol with 0.1% sodium azide as a preservative. One bottle is sufficient to mount up to 500 slides.
Cotronics Corp Resbond™ 907GF Adhesive & Sealant, 1 lb. Container (1/2 pint)
This item has a minimum order quantity of 3 per supplier requirements.
This moist, creamy putty is easily applied from standard caulking cartridges for use from -300F to 2300F. Just apply to steel, stainless, iron, most metals, ceramics, ceramic cloth, tapes, gaskets, tadpole gaskets, etc. Air dries in 4-12 hours at room temp. (curing may be accelerated with mild heat) and is resistant to most chemicals, solvents, oxidizing and reducing atmospheres, aging, thermal cycling and electricity. Use for bonding, sealing and repairing exhaust systems, fire brick, gas turbines, brazing fixtures, equipment, stacks, etc. Ideal for use in any high temperature Assembly, Production, Repair or Maintenance Application.
Ellsworth Adhesive Co SYLGARD 184 SILICONE 3.9KG
2-part, 10:1 mix, transparent encapsulant with good flame resistance. 10:1 mix ratio; flowable; room temperature or heat cure; high tensile strength; same as Sylgard 182 Elastomer but with RT cure capability; UL recognized; Mil Spec approved.
Specialty Fluids Co FOMBLIN 25/6 1KG
This item has a minimum qty of 3 per supplier requirements.
FOMBLIN 25/6 1KG.
Electron Microscopy Sciences Label & Adhesive Remover 4.5 OZ
The first label and adhesive remover to really work. To use, gently rub the label, wipe away the excess material from the surface, wait for 30 seconds then simply peel off the label, leaving a clean surface.